Casio W-752D-1AVES bruksanvisning

Casio W-752D-1AVES
9 · 1
PDF bruksanvisning
 · 4 sider
Engelsk
bruksanvisningCasio W-752D-1AVES

Operation Guide 2925

1
MO0410-EA

About This Manual

Button operations are indicated using the letters shown
in the illustration.
Each section of this manual provides you with the
information you need to perform operations in each
mode. Further details and technical information can be
found in the “Reference” section.
(Light)
Stopwatch Mode
Dual Time Mode Alarm Mode Countdown Timer Mode
Recall Mode
Press C.

General Guide

Press C to change from mode to mode.
In any mode, press L to illuminate the display.
Timekeeping Mode

Timekeeping

Use the Timekeeping Mode to set and view the current
time and date.
To set the time and date
1. In the Timekeeping Mode, hold down A until the
seconds start to flash, which indicates the setting
screen.
2. Press C to move the flashing in the sequence shown
below to select other settings.
Day of week
Month Day
HourSeconds
12/24-Hour
Format
Day Month
Ye a r
Minutes
Hour : Minutes
Seconds
PM indicator
Year
4. Press A to exit the setting screen.
The 12-hour/24-hour timekeeping format you select in the Timekeeping Mode is
applied in all modes.
The day of the week is automatically displayed in accordance with the date (year,
month, and day) settings.
Setting
Seconds
Hour, Minutes
12/24-Hour
Format
Year, Month, Day
Button Operation
Press D to reset to 00.
Use D (+) and B () to change the setting.
Press D to toggle between 12-hour (12H) and
24-hour (24H) timekeeping.
Use D (+) and B () to change the setting.
Screen
3. When the setting you want to change is flashing, use D and B to change it as
described below.

Stopwatch

The 1/100-second stopwatch can measure elapsed time
and lap/split times. The stopwatch uses the basic data you
input and a pacer signal to calculate the distance you
cover while jogging or running. Stopwatch times and your
distance are also stored in memory.
The stopwatch measurement operation continues even
if you exit the Stopwatch Mode.
Exiting the Stopwatch Mode while a lap/split time is
frozen on the display clears the lap/split time and returns
to elapsed time measurement.
Stopwatch measurements are performed in the
Stopwatch Mode, which you enter by pressing C.
Timekeeping Mode time
1/100 second
Seconds
Hours
Minutes
Remaining memory
How the Stopwatch Works
There are two ways you can use the stopwatch: to measure elapsed time and lap/split
times like a standard stopwatch (see To measure times with the stopwatch), and to
keep track of the distance you cover while jogging or running. In order to use the
stopwatch to keep track of distance, you must first perform the steps listed below.
1. Set your basic data. See Basic Data.
2. Turn on the pacer signal. See To turn the pacer signal on and off.
Note
In order to obtain accurate distance calculations, you must set accurate basic data
and keep your exercise pace in accordance with the pacer signal emitted by the
watch.
See How Stopwatch Data is Stored for information about the type of data the watch
stores in memory when you use the stopwatch.
Use the Recall Mode to view data stored in memory.
You can view distance covered data only by recalling it in the Recall Mode. It does
not appear on the Stopwatch Mode screen.
To measure times with the stopwatch
Note
Pressing D to perform a lap/split time operation freezes the lap/split time at that
point on the display for about eight seconds. After that, the display returns to normal
stopwatch time measurement.
During a stopwatch time measurement operation, the upper part of the display
shows the current lap/split number and the hour digit, the center part shows the
current split time, and the lower part shows the current lap time.
When the pacer signal is turned on, it sounds for the first 30 seconds after you start
a stopwatch time measurement operation. After that, the pacer signal sounds for 30
seconds whenever you press A.
ClearNext Lap/
Split
B
Start Stop
Elapsed Time
Re-start Clear
B
Stop
B
B
D
Lap/Split Times
B
Start Lap/Split
D
Stop
D
B
D
If the pacer signal does not sound even though you have it turned on, press A to
change the positions of the lap time and split time on the display. This should cause
the pacer signal to sound.
Selecting the Stopwatch Screen Format
The following shows how you can control the position of the lap time and split time on
the stopwatch screen.
The Lap/Split indicator uses arrows to indicate the location the lap time and split
(elapsed) time.
Lap/Split number
Split
time
Lap time
Split time
More than 10 hours
Press A.
Lap time Hours
Minutes
Seconds
Lap/Split
indicator
When you first start a stopwatch operation by pressing B, both the center part and
the lower part of the display show minutes, seconds, and 1/100 second. Whenever
the time shown in the lower part of the display is greater than 60 minutes, the display
format changes to show hours, minutes, and seconds. Whenever the time in the
center part of the display is greater than 10 hours, the display format changes to
show hours, minutes, and seconds.
Basic Data
The term basic data refers to the pacer signal setup, and information about your
stride length.
Important!
You cannot change basic data settings while a Stopwatch Mode time measurement
operation is in progress. Stopwatch operation must be stopped and the Stopwatch
screen must be cleared to all zeros before you can change basic data settings.
Whenever you want to change the stride length unit, you must first reset the
Cumulative Total screen to zero. See To reset the cumulative total screen for
information about how to do this.
Be sure to update basic data values whenever the person using the watch changes.
Pacer Signal
The pacer signal of this watch beeps in accordance with a pacer value (rate) set by
you. You can use the pacer signal to maintain a constant pace while jogging or
running. You can also turn off the pacer signal when you do not want to use it.
The pacer value you set specifies the number of beeps per minute.
Turning on the pacer signal causes the watch to beep at the rate specified by the
pacer value.
You can set a pacer value in the range of 100 to 200 beats per minute, in units of 5.
You can disable the pacer function by setting a pacer value of xxx. While the pacer
value is set to xxx, the watch does not calculate distance covered.

Bruksanvisning

Se håndboken for Casio W-752D-1AVES her gratis. Denne håndboken er under kategorien Sportsklokker og har blitt vurdert av 1 personer med et gjennomsnitt på 9. Denne håndboken er tilgjengelig på følgende språk: Engelsk. Har du et spørsmål om Casio W-752D-1AVES eller trenger du hjelp? Still spørsmålet ditt her

Trenger du hjelp?

Har du spørsmål om Casio W-752D-1AVES og svaret står ikke i manualen? Still spørsmålet ditt her. Gi en klar og omfattende beskrivelse av problemet og spørsmålet ditt. Jo bedre problemet og spørsmålet beskrives, jo enklere vil det være for andre eiere av Casio W-752D-1AVES å kunne gi deg et godt svar.

Antall spørsmål: 0

Spesifikasjoner for Casio W-752D-1AVES

Nedenfor finner du produktspesifikasjonene og de manuelle spesifikasjonene til Casio W-752D-1AVES.

Generelt
Merke Casio
Modell W-752D-1AVES | W-752D-1AVES
Produkt Sportsklokken
Språk Engelsk
Fyltype Brukermanual (PDF)
Tekniske detaljer
Mekanismetype Quartz
Urskivetype LCD-urskive
Vanntett Ja
Vannbestandig dybdenivå 100 m
Støtsikker -
Stoppeklokke -
Stoppeklokke Ja
Kalender Ja
LED-baklys Ja
Nøyaktighet 30 sek/måned
Snooze-funksjon Ja
Klokketype Armbåndsur
Design
Klokkeetuiets materiale Rustfritt stål
Dekselfarge Rustfritt stål
Armbånd, materiale Rustfritt stål
Hovedfarge på reim Rustfritt stål
Glasstype -
Boks-form Rund
Hovefarge på urskive Grå
Urviser stil Arabiske tall
Produktdesign Tilfeldig
Kjønnstype Hankjønn
Energihåndtering
Batteritype CR2025
Batterilevetid 10 år
Vekt og dimensjoner
Bredde 42.4 mm
Dybde 14.6 mm
Høyde 48.3 mm
Vekt 89 g
vis mer

Vanlige spørsmål

Finner du ikke svaret på spørsmålet ditt i manualen? Du kan finne svaret på spørsmålet ditt i Vanlige spørsmål om Casio W-752D-1AVES under.

Finner du ikke spørsmålet ditt i listen? Still spørsmålet ditt her

Ingen resultater