Datalogic Heron bruksanvisning

Datalogic Heron
(1)
  • Sideantall: 2
  • Fyltype: PDF
Datalogic Scanning, Inc.
959 Terry Street
Eugene, Oregon 97402
USA
Telephone: (541) 683-5700
Fax: (541) 345-7140
An Unpublished Work - All rights reserved. No part of the contents of this documentation or the
procedures described therein may be reproduced or transmitted in any form or by any means
without prior written permission of Datalogic Scanning, Inc. or its subsidiaries or affiliates
("Datalogic" or “Datalogic Scanning”). Owners of Datalogic products are hereby granted a non-
exclusive, revocable license to reproduce and transmit this documentation for the purchaser's
own internal business purposes. Purchaser shall not remove or alter any proprietary notices,
including copyright notices, contained in this documentation and shall ensure that all notices
appear on any reproductions of the documentation.
Should future revisions of this manual be published, you can acquire printed versions by
contacting your Datalogic representative. Electronic versions may either be downloadable from
the Datalogic website (www.scanning.datalogic.com) or provided on appropriate media. If you
visit our website and would like to make comments or suggestions about this or other Datalogic
publications, please let us know via the "Contact Datalogic" page.
DISCLAIMER
Datalogic has taken reasonable measures to provide information in this manual that is complete
and accurate, however, Datalogic reserves the right to change any specification at any time
without prior notice. Datalogic is a registered trademark of Datalogic S.p.A. in many countries and
the Datalogic logo is a trademark of Datalogic S.p.A. all licensed to Datalogic Scanning, Inc. All
other trademarks and trade names referred to herein are property of their respective owners
SERVICE AND SUPPORT
Datalogic provides several services as well as technical support through its website. Log on to
www.scanning.datalogic.com and click on the links indicated for further information including:
PRODUCTS
Search through the links to arrive at your product page where you can download specific
Manuals and Software & Utilities including:
- Datalogic Aladdin™ a multi-platform utility program that allows device configuration
using a PC. It provides RS-232 interface configuration as well as configuration barcode
printing.
SERVICE & SUPPORT
- Technical Support - Product documentation and programming guides and Technical
Support Department in the world
- Service Programs - Warranty Extensions and Maintenance Agreements
- Repair Services - Flat Rate Repairs and Return Material Authorization (RMA)
Repairs.
- Downloads – Manuals & Documentation, Data Sheets, Product Catalogues, etc.
CONTACT US
Information Request Form and Sales & Service Networkies
Datalogic Scanning, Inc.
07
959 Terry Street
Eugene, OR 97402
USA
dichiara che
declares that the
déclare que le
bescheinigt, daß das Gerät
declare que el
HERON Dxxx
e tutti i suoi modelli
and all its models
et tous ses modèles
und seine Modelle
y todos sus modelos
sono conformi alle Direttive del Consiglio Europeo sottoelencate:
are in conformity with the requirements of the European Council Directives listed below:
sont conformes aux spécifications des Directives de l'Union Européenne ci-dessous:
den nachstehenden angeführten Direktiven des Europäischen Rats:
cumple con los requisitos de las Directivas del Consejo Europeo, según la lista siguiente:
89/336/EEC EMC Directive
92/31/EEC, 93/68/EEC
emendamenti successivi
further amendments
ses successifs amendements
späteren Abänderungen
succesivas enmiendas
Basate sulle legislazioni degli Stati membri in relazione alla compatibilità elettromagnetica ed alla sicurezza dei
prodotti.
On the approximation of the laws of Member States relating to electromagnetic compatibility and product safety.
Basée sur la législation des Etats membres relative à la compatibilité électromagnétique et à la sécurité des produits.
Über die Annäherung der Gesetze der Mitgliedsstaaten in bezug auf elektromagnetische Verträglichkeit und
Produktsicherheit entsprechen.
Basado en la aproximación de las leyes de los Países Miembros respecto a la compatibilidad electromagnética y las
Medidas de seguridad relativas al producto.
Questa dichiarazione è basata sulla conformità dei prodotti alle norme seguenti:
This declaration is based upon compliance of the products to the following standards:
Cette déclaration repose sur la conformité des produits aux normes suivantes:
Diese Erklärung basiert darauf, daß das Produkt den folgenden Normen entspricht:
Esta declaración se basa en el cumplimiento de los productos con las siguientes normas:
EN 55022 (CLASS B ITE), August 1994:
AMENDMENT A1 (CLASS B ITE), October 2000:
LIMITS AND METHODS OF MEASUREMENTS OF RADIO
DISTURBANCE CHARACTERISTICS OF INFORMATION
TECHNOLOGY EQUIPMENT
EN 55024, SEPTEMBER 1998:
INFORMATION TECHNOLOGY EQUIPMENT
IMMUNITY CHARACTERISTICS
LIMITS AND METHODS OF MEASUREMENT
March 1st, 2007

Heron

D130 READERS

QUICK REFERENCE GUIDE

.
©2011 Datalogic Scanning, Inc 820035214 (Rev. G) August-2011
UPDATES AND LANGUAGE AVAILABILITY
UK/US
The latest drivers and documentation updates for this product are available on
Internet.
Log on to: www.scanning.datalogic.com
I
Su Internet sono disponibili le versioni aggiornate di driver e documentazione di
questo prodotto. Questo manuale è disponibile anche nella versione italiana.
Collegarsi a: www.scanning.datalogic.com
F
Les versions mises à jour de drivers et documentation de ce produit sont
disponibles sur Internet. Ce manuel est aussi disponible en version française.
Cliquez sur : www.scanning.datalogic.com
D
Im Internet finden Sie die aktuellsten Versionen der Treiber und Dokumentation für
dieses Produkt. Die deutschsprachige Version dieses Handbuches ist auch
verfügbar.
Adresse : www.scanning.datalogic.com
E
En Internet están disponibles las versiones actualizadas de los drivers y
documentación de este producto. También está disponible la versión en español
de este manual.
Dirección Internet : www.scanning.datalogic.com
CONNECTIONS
WEDGE
RS-232
PEN
USB
COMPLIANCE
LED CLASS
Class 1 LED product.
This product conforms to EN60825-1:2001.
FCC COMPLIANCE
Modifications or changes to this equipment without the expressed written approval
of Datalogic could void the authority to use the equipment.
This device complies with PART 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference which
may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class A
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference when the equipment is
operated in a commercial environment. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at his
own expense.
POWER SUPPLY
This device is intended to be connected to a UL Listed/CSA Certified computer
which supplies power directly to the reader or else be supplied by a UL Listed/CSA
Certified Power Unit marked “Class 2” or LPS power source rated 5 V, minimum 180
mA, which supplies power directly to the reader via the power connector of the
cable.
WEEE COMPLIANCE
DISCONNECTING THE CABLE
PATENTS
This product is licensed under the following U.S. patent: 6,158,661
This product is covered by one or more of the following patents:
U.S. patents 5,992,740; 6,305,606 B1; 6,631,846 B2; 6,517,003 B2; 6,712,271 B2; 6,808,114
B1; 6,817,525 B2; and 6,834,806 B2
European patents 851,378 B1; 895,175 B1; 962,880 B1; 997,760 B1; 1,128,315 B1; and
1,164,536 B1
Additional patents pending.
Warranty Coverage
Datalogic warranties this product against defects in workmanship and materials, for a period of 5
years from the date of shipment, provided that the product is operated under normal and proper
conditions.
Datalogic Scanning ("Datalogic") hardware products are warranted against defects in material
and workmanship under normal and proper use. The liability of Datalogic under this warranty is
limited to furnishing the labor and parts necessary to remedy any defect covered by this warranty
and restore the product to its normal operating condition. Repair or replacement of product during
the warranty does not extend the original warranty term. Products are sold on the basis of
specifications applicable at the time of manufacture and Datalogic has no obligation to modify or
update products once sold.
If Datalogic determines that a product has defects in material or workmanship, Datalogic shall, at
its sole option repair or replace the product without additional charge for parts and labor, or credit
or refund the defective products duly returned to Datalogic. To perform repairs, Datalogic may
use new or reconditioned parts, components, subassemblies or products that have been tested
as meeting applicable specifications for equivalent new material and products. Customer will
allow Datalogic to scrap all parts removed from the repaired product. The warranty period shall
extend from the date of shipment from Datalogic for the duration published by Datalogic for the
product at the time of purchase (Warranty period). Datalogic warrants repaired hardware devices
against defects in workmanship and materials on the repaired assembly for a 90 day period
starting from the date of shipment of the repaired product from Datalogic or until the expiration of
the original warranty period, whichever is longer. Datalogic does not guarantee, and it is not
responsible for, the maintenance of, damage to, or loss of configurations, data, and applications
on the repaired units and at its sole discretion can return the units in the "factory default"
configuration or with any software or firmware update available at the time of the repair (other
than the firmware or software installed during the manufacture of the product). Customer accepts
responsibility to maintain a back up copy of its software and data.
Warranty Claims Process
In order to obtain service under the Factory Warranty, Customer must notify Datalogic of the
claimed defect before the expiration of the applicable Warranty period and obtain from Datalogic
a return authorization number (RMA) for return of the product to a designated Datalogic service
center. If Datalogic determines Customer's claim is valid, Datalogic will repair or replace product
without additional charge for parts and labor. Customer shall be responsible for packaging and
shipping the product to the designated Datalogic service center, with shipping charges prepaid.
Datalogic shall pay for the return of the product to Customer if the shipment is to a location within
the country in which the Datalogic service center is located. Customer shall be responsible for
paying all shipping charges, duties, taxes, and any other charges for products returned to any
other locations. Failure to follow the applicable RMA policy, may result in a processing fee.
Customer shall be responsible for return shipment expenses for products which Datalogic, at its
sole discretion, determines are not defective or eligible for warranty repair.
Warranty Exclusions
The Datalogic Factory Warranty shall not apply to:
(i) any product which has been damaged, modified, altered, repaired or upgraded by
other than Datalogic service personnel or its authorized representatives;
(ii) any claimed defect, failure or damage which Datalogic determines was caused by
faulty operations, improper use, abuse, misuse, wear and tear, negligence, improper
storage or use of parts or accessories not approved or supplied by Datalogic;
(iii) any claimed defect or damage caused by the use of product with any other
instrument, equipment or apparatus;
(iv) any claimed defect or damage caused by the failure to provide proper maintenance,
including but not limited to cleaning the upper window in accordance with product
manual;
(v) any defect or damage caused by natural or man-made disaster such as but not
limited to fire, water damage, floods, other natural disasters, vandalism or abusive
events that would cause internal and external component damage or destruction of
the whole unit, consumable items;
(vi) any damage or malfunctioning caused by non-restoring action as for example
firmware or software upgrades, software or hardware reconfigurations etc.;
(vii) the replacement of upper window/cartridge due to scratching, stains or other
degradation and/or
(viii) any consumable or equivalent (e.g., cables, power supply, batteries, keypads, touch
screen, triggers etc.).
No Assignment
Customer may not assign or otherwise transfer its rights or obligations under this warranty except
to a purchaser or transferee of product. No attempted assignment or transfer in violation of this
provision shall be valid or binding upon Datalogic.
DATALOGIC'S LIMITED WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS
OR IMPLIED, ORAL OR WRITTEN, STATUTORY OR OTHERWISE, INCLUDING, WITHOUT
LIMITATION, ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A
PARTICULAR PURPOSE, OR NONINFRINGEMENT. DATALOGIC SHALL NOT BE LIABLE
FOR ANY DAMAGES SUSTAINED BY CUSTOMER ARISING FROM DELAYS IN THE
REPLACEMENT OR REPAIR OF PRODUCTS UNDER THE ABOVE. THE REMEDY SET
FORTH IN THIS WARRANTY STATEMENT IS THE CUSTOMER'S SOLE AND EXCLUSIVE
REMEDY FOR WARRANTY CLAIMS. UNDER NO CIRCUMSTANCES WILL DATALOGIC BE
LIABLE TO CUSTOMER OR ANY THIRD PARTY FOR ANY LOST PROFITS, OR ANY
INCIDENTAL, CONSEQUENTIAL IN-DIRECT, SPECIAL OR CONTINGENT DAMAGES
REGARDLESS OF WHETHER DATALOGIC HAD ADVANCE NOTICE OF THE POSSIBILITY
OF SUCH DAMAGES.
Risk of Loss
Customer shall bear risk of loss or damage for product in transit to Datalogic. Datalogic shall
assume risk of loss or damage for product in Datalogic's possession. In the absence of specific
written instructions for the return of product to Customer, Datalogic will select the carrier, but
Datalogic shall not thereby assume any liability in connection with the return shipment.
Datalogic Heron

Trenger du hjelp?

Antall spørsmål: 0

Har du et spørsmål om Datalogic Heron eller trenger du hjelp? Still spørsmålet ditt her. Gi en tydelig og omfattende beskrivelse av problemet og spørsmålet ditt. Jo mer detaljert du beskriver problemet og spørsmålet, desto lettere blir det for andre eiere av Datalogic Heron å gi et godt svar på spørsmålet ditt.

Se håndboken for Datalogic Heron her gratis. Denne håndboken er under kategorien Strekkodelesere og har blitt vurdert av 1 personer med et gjennomsnitt på 7.5. Denne håndboken er tilgjengelig på følgende språk: Engelsk. Har du et spørsmål om Datalogic Heron eller trenger du hjelp? Still spørsmålet ditt her

Spesifikasjoner for Datalogic Heron

Generelt
Merke Datalogic
Modell Heron
Produkt Strekkodeleser
Språk Engelsk
Fyltype PDF
Scanning
Sensortype CCD
Lineære (1D)-strekkoder støttet Codabar,Code 11,Code 128,Code 39,Code 93,Plessey,Telepen
Matrix (2D)-strekkoder støttet Støttes ikke
Arbeidsavstand 210 mm
Lesehastighet (maks.) 256 lesinger/s
Bølgelengde 640 nm
Tilt lesnings-vinkel 30 °
Pitch lesnings-vinkel 75 °
Yaw lesnings-vinkel 70 °
Modell/Type Stasjonær strekkodeleser
Tilkoblingsevne
Tilkoblingsteknologi Koblet med ledninger (ikke trådløs)
Standard grensesnitt USB
Kabellengde 2 m
Ytelse
Produktfarge Sort
Kroppsmateriale Polykarbonat (PC)
Internasjonal beskyttelses (IP)-kode IP30
LED-indikatorer Ja
Sertifisering IEC 60825 Class 1
Alarm Ja
Tekniske detaljer
Bærekraftsertifikater RoHS
Energihåndtering
Strømkildetype USB
Inngangsspenning 5 V
Strømforbruk 155 mA
Miljømessige forhold
Driftstemperatur (T-T) 0 - 55 °C
Oppbevaringstemperaturomåde (Celsius) -20 - 70 °C
Vekt og dimensjoner
Bredde 68 mm
Dybde 152 mm
Høyde 153 mm
Vekt 160 g
Datainnpakking
Kabler inkludert USB
vis mer

Vanlige spørsmål

Nedenfor finner du de vanligste spørsmålene folk har om Datalogic Heron .

Finner du ikke spørsmålet ditt i listen? Still spørsmålet ditt her