Lenmar LAC916RSG

Lenmar LAC916RSG bruksanvisning

(1)
  • Model PPU916RS
    Lenmar PowerPort Laptop Battery – The Ultimate Power On The Go
    Important Safety Instructions are included.
    Please read the entire manual before use.
    OWNER’S MANUAL
    Thank you for purchasing the PPU916RS PowerPort Laptop Battery for notebook and laptop computers. The
    PPU916RS provides a 16 & 19 VDC output that can provide up to 3 hours of additional runtime. Also included
    is a USB output port for charging your cell phone, PDA, MP3 player or any other device that can be charged
    from a standard USB port. Please note: This is not compatible with tablets.
    PRE-OPERATION SETUP
    Please make sure you follow the two steps outlined below to determine the right settings compatible with
    your notebook or laptop computer.
    Step 1. Determine Polarity
    The PPU916RS works only with notebook and laptop computers that have center positive” polarity. Please
    confirm that your laptop has center positive” polarity before using the PPU916RS. You may look for the
    below in your notebook or laptop user manual (please see image to the right).
    DO NOT USE the PPU916RS if your device shows center negative” polarity.
    Step 2: Determine Voltage Required
    Please determine the required voltage needed for your
    notebook or laptop computer. Once you have determined
    the correct voltage, slide the switch on your PPU916RS
    to either 16V or 19V.
    In some cases you may determine the desired voltage is between whole numbers such as 18.5VDC. In this case
    you would use the 19V setting. In the case of 20VDC, also choose the setting of 19VDC.
    3.) Review the voltage indication marked next to
    the input jack on the notebook or laptop
    computer to be powered.
    Example: VIN: = 16VDC or 16V DC
    1.) Review the power or ID plate on the original
    AC / DC power supply that comes with your
    notebook or laptop computer. Look for the word
    “DC RATING or OUTPUT followed by a number
    and VDC*.
    Example: VIN: = 16VDC or 16V DC
    2.) Review the power ID plate on your notebook or
    laptop computer to be powered. This is usually
    found on the bottom of your computer. Look
    for the word “DC RATING or INPUT followed by
    a number and VDC*.
    Example: DC RATING: 16VDC or INPUT: 16VDC
    1.
    2.
    3.
    4.
    313-100-33-0410 r2 y1
    OPERATING INSTRUCTIONS
    The PPU916RS must be charged before initial use to power up your notebook or laptop computer.
    *Note: The specific notation “VDC might not be indicated. Instead the following international symbol
    shown might be used 16 . In some cases you may determine the desired voltage is between whole
    numbers such as 15.5VDC. In this case use the next higher voltage setting. For example, use 16VDC if
    the desired voltage is 15.5VDC.
    Select the adapter tips that correspond to your laptop or notebook brand and model by visiting
    www.lenmar.com/adaptertips. Verify the fit of the power tip by plugging it into the input jack on your laptop.
    It is important that the center contact or pin be the correct size to insure proper electrical contact. The tip
    should slide in as easily as the original adapter tip. Do not force it. If it does not fit easily please verify that you
    have the correct tip listed in our reference.
    SELECTING THE RIGHT BATTERY TIP
    The PPU916RS comes with 8 power tips, and 7 charging tips and one 30” power cord. These tips will
    allow you to charge the PPU916RS and also power your laptop.
    Determine the correct power tip and connect it to the included 30” power cord then plug it into your
    laptop. The power tips consist of models L01D, L51D, L52D, L53D, L54D, L55D, L61D, and L62D. The
    charging tips are made to connect to your existing AC Adaptor and then be plugged into the “IN” jack on
    the PPU916RS. They are the right angle tips consisting of models: L01, L51, L53, L54, L55, L61 and L62. You
    may also use your existing AC Adapter tip if it fits.
    CHARGING THE PPU916RS
    To charge the PPPU916RS, use your notebook or laptop
    computer’s existing AC Adapter. Connect the AC Adapter
    to the correct charging tip. Then plug in the tip into the
    “IN” port of the PPU916RS. Approximate charge time is 5
    hours. You will see an indicator on the 5th LED light. The
    light will be red while charging and will turn blue once the
    charge is complete.
    CONNECTING THE PPU916RS TO YOUR LAPTOP
    Plug the supplied 30” power cable into the “OUT” port on the PPU916RS. Attach the correct power tip to
    the other end of the cable and plug this into the “DC IN” port of your laptop.
    CAPACITY INDICATOR
    Press the button on the top of the PPU916RS to show remaining capacity, there are 4 indicator lights.
    USB POWER PORT
    The PPU916RS has a built in USB port for the convenience of
    charging your cell phone, PDA, MP3 player or any other
    device that can be charged from a standard USB port. For
    best results use an OEM or factory approved USB cable.
    Please note: This is not compatible with tablets.
    NOTICE
    • Keep the PPU916RS dry, if it gets wet wipe it dry immediately.
    • Use and store it in normal temperature environments.
    • Handle the PPU916RS carefully, do not drop it. Do not use the PPU916RS if the cords become damaged.
    • Keep the PPU916RS away from dust and dirt; wipe it with a cloth occasionally to keep it clean.
    • There are no user serviceable parts inside! Modifying or tampering with its internal components can cause a
    malfunction and will invalidate its warranty. If your PPU916RS is not performing as it should during the
    warranty period, contact Lenmar for warranty service.
    PPU916RS
    PPU916RS
    OUTPUT CABLE
    1 2 3 45BUTTON
    LED
    CHARGING
    INDICATOR
    OUTPUT TIP
    SLIDING BUTTON BETWEEN 16V/19V SELECTION
    LIMITED 1 YEAR WARRANTY
    Lenmar product is warranted to be free of defective parts and workmanship for stated period from the
    original date of purchase when sold through our website or our authorized retailers. Warranties are not
    transferable. The warranty excludes damage resulting from accident, misuse, modication, delay or loss of
    use, damage to equipment or by normal wear and tear.
    ALL WARRANTY CLAIMS ARE PROCESSED ONLINE AT THE FOLLOWING LINK:
    WWW.LENMAR.COM/WARRANTY
    Warranty claims made after 60 days from the original date of purchase, will require a processing fee. Details
    will be included while completing the online warranty request. Payment can be made via credit card when
    completing the warranty form or a check can be included with the package when it is returned to Lenmar.
    Once the request is completed, you will be emailed with a conrmation WRA number and instructions on how
    to return the item for a warranty replacement.
    Proposition 65 Notice (California)
    The following statement is required in the state of California pursuant to the settlement of an action brought
    by the Mateel Environmental Justice Foundation against multiple electronics and appliance manufacturers
    • WARNING: Handling the cord on this product will expose you to lead, a chemical known to the
    state of California to cause birth defects or other reproductive harm. Wash hands after handling.
    Contact Lenmar Enterprises, Inc.
    For more information about product compatibility and adapter tips, please go online and visit
    www.lenmar.com/adaptertips.
    For additional questions, comments, or to explore other Lenmar power solutions, visit our website at:
    www.lenmar.com, email info@lenmar.com, or call 800-424-2703 between the hours of 9am-5pm PST.
    PRODUCT SPECIFICATIONS
    Chemistry: Lithium-Polymer
    Charge input: 15V ~ 25 V 2.5A~ 4A adapter input
    Discharge output: 5.3 V, 16V, 19V
    CAPACITY
    INDICATOR
    AC ADAPTER LABEL
    DC RATING:16V
    1.
    BOTTOM OF LAPTOP
    DC RATING:16V
    2.
    SIDE OF LAPTOP
    VIN: = 16VDC
    3.
    CHARGING TIP
    POWER TIP
    L01D
    L51D
    L52D
    L53D
    L54D
    L55D
    L61D
    L62D
    L01
    L51
    L53
    L54
    L55
    L61
    L62
    PPU916RS
    CHARGE TIP
    ORIGINAL NOTEBOOK AC ADAPTER
    LED 1 indicates 0% to 25%
    LED 2 indicates 25% to 50%
    LED 3 indicates 40% to 60%
    LED 4 indicates 75% to 100%
    USB PORT
    Lithium-Polymer battery must be
    recycled or disposed of properly.
    Charge time: Approx 5 hours.
    Output WH: 61Wh / 5500mAh
    CENTER POSITIVE

Trenger du hjelp?

Antall spørsmål: 0

Har du et spørsmål om Lenmar LAC916RSG eller trenger du hjelp? Still spørsmålet ditt her. Gi en tydelig og omfattende beskrivelse av problemet og spørsmålet ditt. Jo mer detaljert du beskriver problemet og spørsmålet, desto lettere blir det for andre eiere av Lenmar LAC916RSG å gi et godt svar på spørsmålet ditt.

Se håndboken for Lenmar LAC916RSG her gratis. Denne håndboken er under kategorien Batteribanker og har blitt vurdert av 1 personer med et gjennomsnitt på 8.7. Denne håndboken er tilgjengelig på følgende språk: Engelsk. Har du et spørsmål om Lenmar LAC916RSG eller trenger du hjelp?

Spesifikasjoner for Lenmar LAC916RSG

Merke Lenmar
Modell LAC916RSG
Produkt Batteribank
EAN 0029521853681, 0295218536810
Språk Engelsk
Fyltype PDF
Design
Antall samtidig tilkoblede enheter (maks.) 2
Produktfarge Svart
Husmateriale -
Lader kompabilitet Mobile phone/Smartphone, Tablet, MP3/MP4, GPS, E-book reader
RoHS-overholdelse -
Ytelse
Batteriteknologi Lithium Polymer (LiPo)
Batterikapasitet 16500mAh
Ladekilde AC, USB
Batterispenning 3.8V
Energihåndtering
Utgangsstrøm 4A
Tilkoblingsevne
Antall USB-porter 1

Relaterte produkter Lenmar LAC916RSG

    Relaterte produkthåndbøker

    Batteribank Lenmar

    Legg til håndbok

    Har du en håndbok som du vil legge til?