Panasonic Lumix DMC-FZ2000 bruksanvisning

Panasonic Lumix DMC-FZ2000

Til høyre finner du Panasonic Lumix DMC-FZ2000 manualen. Hvis du har noen spørsmål om ditt vennligst la oss høre det nederst på siden.

Merke
Panasonic
Modell
Lumix DMC-FZ2000
Produkt
Språk
Engelsk
Fyltype
PDF
Nettside
http://www.panasonic.com/
1
Recording 4K photos
Quick Guide for 4K Photo
You can select the desired moment from a burst of pictures taken at 30 frames/second and save that moment as a picture of 8 million pixels (approx.).
ENGLISH
DVQW1062ZA
Digital Camera
Model No. DMC-FZ2000
Set the drive mode dial to [ 1 ] (4K Photo).
Press [MENU/SET] to display the [Rec] menu.
2
Press 3 / to select [4K PHOTO], and press [MENU/SET].
Press
4 / to select [Rec Method], and press [MENU/SET].
Press the cursor buttons
5 / to select the method used to record 4K photos,
and press [MENU/SET].
After selecting the method used to record 4K photos, press the shutter button halfway to display the
recording screen.
Drive mode dial Shutter button
[4K Burst]
For capturing the best shot of a fast-moving subject
(e.g., sports, aeroplanes, trains)
Burst recording is performed while the shutter button is pressed and held.
The shutter sound will be heard repeatedly.
Press the shutter button halfway.1
Press and hold the shutter button fully for as long as you 2
want to perform recording.
Press the button fully slightly in advance. Recording starts approximately
0.5 seconds after it has been pressed fully.
If you are using Auto Focus, [Continuous AF] will work during recording. Focus
will be adjusted continuously.
Press and hold

Recording is performed

[4K Burst(S/S)]
For capturing unpredictable photo opportunities
(e.g., plants, animals, children)
Burst recording starts when the shutter button is pressed and stops when
pressed again. Start and stop tones will be heard.
Press the shutter button fully.1
Press the shutter button fully again.2
If you are using Auto Focus, [Continuous AF] will work during recording. Focus will
be adjusted continuously.
Start (First)

Stop (Second)

Recording is performed

Adding markers to select and save pictures
You can add markers if you press [Fn5] during recording. You can skip to the positions where you added markers on
the slide view screen or 4K burst playback screen.
[4K Pre-Burst]
For recording as needed whenever a photo opportunity arises
(e.g., the moment when a ball is thrown)
Burst recording is performed for approximately 1 second before and after
the moment that the shutter button is pressed. The shutter sound will be
heard only once.
Press the shutter button fully.1
In situations where you want to lock focus and exposure, such as when the
subject is not at the centre, use [AF/AE LOCK].

Approximately 1 second

Recording is performed

When recording 4K photos, a 4K burst fi le will be saved in [MP4] format.
Use a UHS Speed Class 3 card to record 4K photos.
When using an SDHC memory card, you can continue recording without interruption even if the fi le size exceeds 4 GB, but the 4K burst fi le will be divided and
recorded/played back separately.
When using an SDXC memory card, even if the continuous recording time exceeds 3 hours and 4 minutes or the fi le size exceeds 96 GB, you can continue
recording without interruption, but the 4K burst fi le will be divided and recorded/played back separately.
When recording 4K photos, the angle of view is narrower.
When [ ] ([4K Pre-Burst]) is set, the battery drains faster and the camera temperature rises. Select [ ] ([4K Pre-Burst]) only when recording.
Using the 4K Photo function to capture the best shot of the subject
([4K Burst] / [4K Burst(S/S)] / [4K Pre-Burst])
DMC-FZ2000_DVQW1062_4KPHOTO_EB_eng.indd 1DMC-FZ2000_DVQW1062_4KPHOTO_EB_eng.indd 1 2016/09/03 12:43:352016/09/03 12:43:35

Har du et spørsmål om Panasonic Lumix DMC-FZ2000?

Hvis du har et spørsmål om "Panasonic Lumix DMC-FZ2000"

Til salgs på